Hensley Bulk Feed Bodies are the highest quality Feed Delivery Units on the Market today.  No other company gives you as many options as Hensley.  We offer bodies from 6' long through 28' long tanks.  Various discharge options are available as well with Auger, Air or Air/Auger Combination.

FLAT CUBE - 36 CU./FT.

Our Flat cube configuration was designed with low clearance in mind.  Loadout height on a straight truck is only 10'7" with an overall height at 11'.*

LOW CUBE - 39 CU./FT.

The Low Cube Design is a popular choice for Mills and Owner/Operators that want high capacity with lower center of gravity.  Capacities range from 5 ton, 2 compartment units to 21 ton, 7 compartment feed bodies.  Overall height on the Low cube is 11'7"* with a Load out height of 11'4".

LOW WIDE CUBE - 43 CU./FT.

Starting out as a very popular configuration, the All New Low Wide Cube configuration gives the overall clearance for low overhead loadouts, and gives almost the same capacity as our "High Cube" configuration at 43 cu. ft./ft.

HIGH CUBE - 44 CU./FT.

Our most widely asked for configuration!  With a maximum capacity of 1,232 Cubic Ft., The Hensley High Cube Bulk Feed body can haul whatever material you need with as many compartment configurations your individual needs demand.  A 40 Degree slope in the bottom of the tank ensures superb flowability with excellent clean-out.  Overall height - 12'4"* and Load out height - 12'0".

WIDE CUBE - 50 CU./FT.

If you need maximum capacity, Hensley's has the solution!  The Wide cube incorporates huge capacities for mills designed to load out at over 12'4".  With an overall clearance of 12'8",* nothing can beat the convenience of larger loads and less trips.  Our second most popular configuration boasts capacities to 28 tons on straight trucks, with larger capacities available with trailers.

*Based On A 42" Frame Height.

Hensley Offers a full Paddle Unit specially designed to haul Range Pellets or Cubes.  The Unit Features Either side or Overhead discharge, Horizontal Rack & Pinion Gates, 1 or 2 piece lids, and a Dual chain drag conveyor in the floor.

           
Click On Pictures To Download